Trend at Corroy Products

Shop By Brand

Browse By Brand

Trend

This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersi... More Info

£37.13 INC VAT

TREND UNI/GB16 UNIBASE GUIDE BUSH 16MM OD

Replacement 16mm plastic line-up guide bush for the UNIBASE. Dimensions: Outside diameter=16 mm Diameter Metric: 16 Diameter 2 Metric: 60 ... More Info

£7.45 INC VAT

TREND UNI/PIN/1 UNIBASE LINE UP PIN 1/4/1/2

Replacement line-up pin for the UNIBASE. Dimensions: To suit 1/4 inch & 1/2 inch collets... More Info

£3.83 INC VAT

TREND UNI/PIN/2 UNIBASE LINE UP PIN 8MM/12MM

Replacement line-up pin for the UNIBASE. Dimensions: To suit 12 mm & 8 mm collets... More Info

£3.83 INC VAT

Trend Universal Subbase C/w Pins & Bush

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. L... More Info

£41.68 INC VAT

Trend Vari Jig Angle Guide VJSAG36

The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle rang... More Info

£109.88 INC VAT

TREND VARIJIG VARIJIG SYSTEM ADJUSTABLE FRAME 700

Adjustable frame and guide for use with a router. Adjustable frame for rectangles and squares. Allows a router to cut recesses, slots, face panel... More Info

£92.99 INC VAT

TREND VJS/AG/36 VARIJIG VARIABLE ANGLE GUIDE 36

Variable angle guide for the router or saw. Adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. Adjustabl... More Info

£128.20 INC VAT

Trend VJS/CG/36 Clamp Guide 36in

Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. It is ideal for holding and clamping work pieces and the ... More Info

£75.32 INC VAT

TREND VJS/CG/ESB VJS/CG END STOP BLOCK

Varijig clamp guide adjustable end stop block. Engages in the T slot on the clamp guide extrusion and can be locked in position using locking knob. ... More Info

£19.66 INC VAT

TREND VJS/CG/EXT VJS/CG HANDLE LEVER EXTENSION

Lever extension handle for Varijig clamp guides. Gives better leverage to operate the clamp, especially when more clamping pressure is required. Sl... More Info

£12.02 INC VAT

TREND VJS/CG/RBP VJS/CG ROUTER BASE PLATE

Plunge router base base accessory for the Varijig clamp guides. Base plate engages in the T-slot in the extrusion. Made from clear plastic. Includ... More Info

£41.54 INC VAT

TREND VJS/CG/SBP VJS/CG SAW BASE PLATE

Circular saw base base accessory for the Varijig clamp guides. Base plate engages in the T-slot in the extrusion. Made from plastic. Includes adjus... More Info

£41.54 INC VAT

TREND VJS/CK VARIJIG SYSTEM CLAMP KIT (PAIR)

Pair of sliding friction clamps with 32mm clamping thickness. The clamp can be used with the Varijig system including the varijig set, straight guide... More Info

£43.74 INC VAT

TREND VJS/CK/L VARIJIG SYSTEM EX LONG CLAMP (PAIR)

Pair of sliding friction clamps with 51mm (2 inch) clamping thickness. To be used with the Trend Varijig Adjustable Frame System. Dimensions: Cla... More Info

£77.16 INC VAT

TREND VJS/FJK VARIJIG SYSTEM FRAME JOINTING KIT

Set of four corner jointing brackets for the VARIJIG.... More Info

£35.84 INC VAT

TREND VJS/G/100 VARIJIG SYSTEM STRAIGHT GUIDE 2.54M

Two lengths of extrusion with jointing piece to give a maximum working length of 100 inches (2540mm). Reduced length for easier transport and storage... More Info

£107.52 INC VAT

TREND VJS/G/CB VARIJIG SYSTEM GUIDE CONNECT BLOCK

Jointing block for the VJS/G/100.... More Info

£16.01 INC VAT

TREND VJS/TG/JIG VJS TRENCHING/GROOVING JIG

Allows grooves and tenons to be cut using a router. Can be used to crosscut boards with a router or circular saw. Frame is adjustable to allow n... More Info

£168.48 INC VAT