Trend at Corroy Products

Shop By Brand

Browse By Brand

Trend

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22.0 mm C... More Info

£75.24 INC VAT

TREND C112X1/4TC FLAT OVOLO 12MM RAD X 11MM CUT

A self guiding flat ovolo to give a smooth corner finish. Alternatively, can be used to produce glazing bar profiles. Dimensions: D=30 mm C=7/16... More Info

£70.66 INC VAT

Trend C115 x 1/4 TCT Self Guided Trim

Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread w... More Info

£32.68 INC VAT

TREND C115AX1/4TC TRIMMING 9.5MM DIA X 25.4MM CUT

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=3/8 inch D=9.5 mm C=1 inch C=24.5 mm ... More Info

£26.62 INC VAT

TREND C115X1/4TC S/GUIDED TRIMMER 9.5MM DIA

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=3/8 inch D=9.5 mm C=1/2 inch C=12.7 mm... More Info

£31.22 INC VAT

TREND C115X8MMTC S/GUIDED TRIMMER 9.5MM DIA

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=3/8 inch D=9.5 mm C=1/2 inch C=12.7 mm... More Info

£31.22 INC VAT

Trend C116 x 1/4 TCT Self Guided Trim 1/2in

Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread w... More Info

£34.30 INC VAT

TREND C116AX1/4TC TRIMMING 12.7MM DIA X 16MM CUT

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=1/2 inch D=12.7 mm C=5/8 inch C=16 mm ... More Info

£24.76 INC VAT

TREND C116X1/2TC S/GUIDED TRIMMER 12.7MM DIA

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm ... More Info

£32.77 INC VAT

TREND C116X1/4TC S/GUIDED TRIMMER 12.7MM DIA

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm ... More Info

£32.77 INC VAT

TREND C117AX1/2TC GUIDED TRIMMER 19.1MM X 25MM

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D1=3/4 inches D1=19.1 mm C=1 inches C=25... More Info

£34.84 INC VAT

TREND C117AX1/4TC GUIDED TRIMMER 19.1MM X 25MM

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D1=3/4 inches D1=19.1 mm C=1 inches C=25... More Info

£34.84 INC VAT

TREND C117BX1/2TC TRIMMING 19.1MM DIA X 50MM CUT

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D1=3/4 inch D1=19.1 mm C=50 mm Overall l... More Info

£64.20 INC VAT

TREND C117X1/4TC GUIDED TRIMMER 15.9MM DIA

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=5/8 inch D=15.9 mm C=5/8 inch C=15.9 m... More Info

£35.87 INC VAT

TREND C119X1/4TC S/GUIDED BEVEL TRIM A=65¡

This is bearing guided and gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. Dimensions: C=1/4 ... More Info

£27.71 INC VAT

TREND C120X1/4TC KEYHOLE 9.5MM DIA

For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. For No8 & No1... More Info

£35.87 INC VAT

Trend C121 x 1/4 TCT Template Profile 1/4in

These trimmers with shank mounted bearings are ideal for template guidance. Use for rebating and trimming edges. Extra care must be taken to avoide b... More Info

£36.38 INC VAT