147 items are stocked by Corroy Products

Trend

TREND CE/CNS/635 COLLET EXTENSION COLLET&NUT SET 1/4
TREND CE/CNS/635 COLLET EXTENSION COLLET&NUT SET 1/4

Multi-slit spring steel collet & nut set for the collet extension. Will also fit the following machines:- Atlas Copco (AEG) OFSE2000, Freud FT2000E... More Info

£70.99 INC VAT
TREND CE/CNS/8 COLLET EXTENSION COLLET&NUT SET 8MM
TREND CE/CNS/8 COLLET EXTENSION COLLET&NUT SET 8MM

Multi-slit spring steel collet & nut set for the 1/2 inch or 12mm shank collet extension. Will also fit the following machines:- Atlas Copco (AEG) ... More Info

£70.99 INC VAT
TREND CE/CNS/8/635 COLLET EXT 8MM COLLET NUT SET 1/4
TREND CE/CNS/8/635 COLLET EXT 8MM COLLET NUT SET 1/4

Multi-slit spring steel collet & nut set for the 8mm shank collet extension. Dimensions: Bore=6.35 mm Bore=1/4 inch... More Info

£36.10 INC VAT
TREND CE/CNS/8/8 COLLET EXT 8MM COLLET NUT SET 8MM
TREND CE/CNS/8/8 COLLET EXT 8MM COLLET NUT SET 8MM

Multi-slit spring steel collet & nut set for the 8mm shank collet extension. Dimensions: Bore=8 mm... More Info

£36.10 INC VAT
TREND CE/NUT/8 COLLET EXTENSION 8MM COLLET NUT
TREND CE/NUT/8 COLLET EXTENSION 8MM COLLET NUT

Replacement collet nut for the 8mm collet extension. Dimensions: D=17 (A/F) mm Thread=M17x0.75mm Diameter Metric: 17 (A/F)... More Info

£12.73 INC VAT
TREND CIRC/1 CIRCLIP FOR 8MM SHANK DIN471-8
TREND CIRC/1 CIRCLIP FOR 8MM SHANK DIN471-8

Sprung steel fasteners to hold bearings in position onto grooved shanks. Dimensions: D=8 mm Diameter Metric: 8... More Info

£2.28 INC VAT
TREND CIRC/2 CIRCLIP 15MM DIN 471-15
TREND CIRC/2 CIRCLIP 15MM DIN 471-15

Sprung steel fasteners to hold bearings in position onto grooved shanks. Dimensions: D=1/2 inch D=12.7 mm Diameter Imperial: 1/2 Diameter... More Info

£2.28 INC VAT
TREND CLEAN/500 TOOL & BIT CLEANER 532ML
TREND CLEAN/500 TOOL & BIT CLEANER 532ML

Spray-on resin and pitch remover. Simply spray on wipe off. Ideal for sawblades, router cutters, planer blades, files, wrenches and drill bits etc... More Info

£35.24 INC VAT
TREND CLT/NUT/T10 COLLET NUT TREND T10 ROUTER
TREND CLT/NUT/T10 COLLET NUT TREND T10 ROUTER

Replacement collet nut. Dimensions: D=22 (A/F) mm Thread=M22x1.0mm Diameter Metric: 22 (A/F)... More Info

£16.85 INC VAT
TREND CLT/NUT/T4 COLLET NUT T4
TREND CLT/NUT/T4 COLLET NUT T4

Replacement collet nut. Dimensions: D=17 (A/F) mm Thread=M15x1.0mm Diameter Metric: 17 (A/F)... More Info

£7.07 INC VAT
TREND CLT/SLV/1012 COLLET SLEEVE 10MM TO 12MM
TREND CLT/SLV/1012 COLLET SLEEVE 10MM TO 12MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£21.20 INC VAT
TREND CLT/SLV/10127 COLLET SLEEVE 10MM TO 12.7MM
TREND CLT/SLV/10127 COLLET SLEEVE 10MM TO 12.7MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£18.18 INC VAT
TREND CLT/SLV/3263 COLLET SLEEVE 3.2MM TO 6.35MM
TREND CLT/SLV/3263 COLLET SLEEVE 3.2MM TO 6.35MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£26.56 INC VAT
TREND CLT/SLV/363 COLLET SLEEVE 3MM TO 6.35MM
TREND CLT/SLV/363 COLLET SLEEVE 3MM TO 6.35MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£23.41 INC VAT
TREND CLT/SLV/612 COLLET SLEEVE 6MM TO 12MM
TREND CLT/SLV/612 COLLET SLEEVE 6MM TO 12MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£18.18 INC VAT
TREND CLT/SLV/6127 COLLET SLEEVE 6MM TO 12.7MM
TREND CLT/SLV/6127 COLLET SLEEVE 6MM TO 12.7MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£18.18 INC VAT
TREND CLT/SLV/6312 COLLET SLEEVE 6.35MM TO 12MM
TREND CLT/SLV/6312 COLLET SLEEVE 6.35MM TO 12MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£18.18 INC VAT
TREND CLT/SLV/63127 COLLET SLEEVE 6.35MM TO 12.7MM
TREND CLT/SLV/63127 COLLET SLEEVE 6.35MM TO 12.7MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£18.18 INC VAT
TREND CLT/SLV/638 COLLET SLEEVE 6.35MM TO 8MM
TREND CLT/SLV/638 COLLET SLEEVE 6.35MM TO 8MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£12.73 INC VAT
TREND CLT/SLV/6395 COLLET SLEEVE 6.35MM TO 9.5MM
TREND CLT/SLV/6395 COLLET SLEEVE 6.35MM TO 9.5MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£12.73 INC VAT
TREND CLT/SLV/68 COLLET SLEEVE 6MM TO 8MM
TREND CLT/SLV/68 COLLET SLEEVE 6MM TO 8MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£12.73 INC VAT
TREND CLT/SLV/810 COLLET SLEEVE 8MM TO 10MM
TREND CLT/SLV/810 COLLET SLEEVE 8MM TO 10MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£21.20 INC VAT
TREND CLT/SLV/812 COLLET SLEEVE 8MM TO 12MM
TREND CLT/SLV/812 COLLET SLEEVE 8MM TO 12MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£21.20 INC VAT
TREND CLT/SLV/8127 COLLET SLEEVE 8MM TO 12.7MM
TREND CLT/SLV/8127 COLLET SLEEVE 8MM TO 12.7MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£18.18 INC VAT
TREND CLT/SLV/895 COLLET SLEEVE 8MM TO 9.5MM
TREND CLT/SLV/895 COLLET SLEEVE 8MM TO 9.5MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£21.20 INC VAT
TREND CLT/SLV/95127 COLLET SLEEVE 9.5MM TO 12.7MM
TREND CLT/SLV/95127 COLLET SLEEVE 9.5MM TO 12.7MM

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co... More Info

£18.18 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118]
Terms & Conditions
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.

© 2024 Corroy Products
Saturday 4th May 2024