For dovetail joints and sliding dovetails.
To suit user preference, the table shows angles from the horizontal and the profiles show angles from th...More Info
Cuts groove for Trend Routaseal.
Position seal into apex of jamb and stop.
More economic to use than more complex seals.
Use with a small 1/4 inch ...More Info
For dovetail joints and sliding dovetails.
Can be used with Ref.10/40 butterfly 14 degree spline cutter.
Dimensions:
D1=12.7 mm
C=10 mm
Overa...More Info
For dovetail joints and sliding dovetails.
Can be used with Ref.10/40 butterfly 14 degree spline cutter.
Dimensions:
D1=25.4 mm
C=25.4 mm
O...More Info
For dovetail joints and sliding dovetails.
Can be used with Ref.10/40 butterfly 14 degree spline cutter.
Dimensions:
D1=19.1 mm
C=19.1 mm
O...More Info
Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal t...More Info
Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.
Dimensions:
OL=84.5 mm
Spigot length incl thread=45 mm
Spigot thr...More Info
Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal t...More Info
Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal t...More Info
A threaded arbor with a UNC1/4 bore.
Dimensions:
OL=48 mm
Spigot length incl thread=16 mm
Spigot thread length=12 mm
Shank Diameter=1/4 inch
...More Info
Threaded arbor with UNC 1/4 inch bore.
Dimensions:
OL=54mm
Spigot length incl thread=21 mm
Spigot thread length=17 mm
Shank Diameter=1/4 inch
...More Info
Replacement arbor for an 8mm bore tool.
Dimensions:
OL=76 mm
Spigot length incl thread=34 mm
Spigot thread length=10.5 mm
Shank Diameter=1/2 in...More Info
Replacement arbor for an 8mm bore tool.
Dimensions:
OL=67 mm
Spigot length incl thread=34 mm
Spigot thread length=10.5 mm
Shak Diameter=1/4 inc...More Info
Replacement arbor for the PSC/106X1/2TC
Dimensions:
OL=97 mm
Spigot length incl thread=53 mm
Spigot thread length=13 mm
Shank Diameter=1/2 inch...More Info
Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of position...More Info
Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positio...More Info
Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positio...More Info
Trend weather seal recessing sets Ref.330 and 331 are designed to accomodate the popular Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system...More Info
Ref 334 recessing cutter will accomodate the Schlegal Aquamac 21 seal. This cutter is designed for use with the Aquamac seal in a wiping mode and com...More Info
Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. The cutter is designed for use with the seal in a wiping mode a...More Info