Trend at Corroy Products

Shop By Brand

Browse By Brand

Trend

TREND 501/14HSS TWIST DRILL 1/4 X 6.3MM DIA

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are... More Info

£15.66 INC VAT

TREND 53/30X1/2TC SHEAR 9.5MM DIA X 25MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£51.47 INC VAT

TREND 53/30X1/4TC SHEAR 9.5MM DIA X 25MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£48.04 INC VAT

TREND 53/82X1/2TC SHEAR 12.7MM DIA X 38MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£66.98 INC VAT

TREND 53/83X1/2TC SHEAR 12.7MM DIA X 50MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£69.32 INC VAT

TREND 55/08X1/4HSS SPIRAL 8MM DIA X 19MM CUT

Ideal for softwoods where a fine finish is required, the upcut prevents burning in plunge cuts. Up-cut spiral tools will give a fine finish and have ... More Info

£53.16 INC VAT

TREND 55/1X1/4HSS ALUMINIUM CUTTER 6.3MM DIA

Straight two flute for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or m... More Info

£26.06 INC VAT

TREND 59/1X1/4HSS ONE FLUTE PIERCE & TRIM 6.35 X 19.1

A single fluted high steel cutter for pierce and trimming of aluminium faced panels in the caravan industry. Dimensions: D=6.3 mm C=19.1 mm OL=7... More Info

£57.01 INC VAT

TREND 6/50X1/4TC SASH BAR OVOLO JOINT 10MM RAD

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Dimensions: D=25 mm C=20 mm R=10 mm Shank Diameter=1/4 in... More Info

£121.81 INC VAT

TREND 6/51X1/2TC SASH BAR OVOLO JOINT 17MM RAD

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Ref. 6/510X1/2TC allows for a tenon on the sash bars. Dimens... More Info

£110.58 INC VAT

TREND 6/5X1/4TC TWO FLUTED OVOLO 10MM RAD

Can be used to make rule joints or glazing bar joints. Dimensions: D=30 mm C=10 mm R=10 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 ... More Info

£106.30 INC VAT

TREND 61/05X1/4TC DOWEL DRILL 5MM DIA X 35MM DL

Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Refs 61/01, 61/06 and 61/08 are suit... More Info

£39.10 INC VAT

TREND 61/08X1/4TC DOWEL DRILL 8MM DIA X 35MM DL

Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Refs 61/01, 61/06 and 61/08 are suit... More Info

£39.10 INC VAT

$TREND 62/10X1/4TC DRILL/C\\SINK/C\\BORE 7/32 253363$

TREND 62/10X1/4TC DRILL/C\'SINK/C\'BORE 7/32 253363

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 gr... More Info

£93.76 INC VAT

$TREND 62/80X1/4TC DRILL/C\\SINK/C\\BORE 3/16 DIA$

TREND 62/80X1/4TC DRILL/C\'SINK/C\'BORE 3/16 DIA

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 gr... More Info

£93.76 INC VAT