Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. The cutter is designed for use with the seal in a wiping mode a...More Info
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber thic...More Info
A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up.
Dimensions:
D=41 mm
C=6.35 mm
C2=10 mm
E=22 mm
OL=7...More Info
A complete cutter set for producing matchlining.
Jointing parts are interchanged on the arbor to change the mode of the cutter.
Set Ref. 338 can be ...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=40 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=40 mm
C=...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=41.3 mm
Kerf=6.0 mm
No. of Te...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=41.3 mm
Kerf=8.0 mm
No. of Te...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=41.3 mm
Kerf=10 mm
No. of Tee...More Info
Bearing guided tool to rout stepped groove for espagnolette lock recess.
Two flute for clean finish.
Dimensions:
D1=40.05 mm
Cut length=16.3/12....More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=40 mm
Kerf=7.0 mm
No. of Teet...More Info