Trend at Corroy Products

Shop By Brand

Browse By Brand

Trend

TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£21.24 INC VAT

TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=1/2 inch D=12.7 mm C=23/64 inch C=9 mm R=4.... More Info

£30.17 INC VAT

TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=5/8 inch D=15.9 mm C=13.5 mm R=6.3 mm Overa... More Info

£32.53 INC VAT

TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=7/8 inch D=22.2 mm C=19/32 inch C=15 mm R=9... More Info

£38.05 INC VAT

Trend C130 x 1/4 TCT Corner Bead

Attractive edge moulds, a full corner bead can be produced by making a second pass at 90° . Used on all man-made boards such as medium density fib... More Info

£78.76 INC VAT

TREND C130X1/4TC CORNER BEAD 4.8MM RAD X 26MM DIA

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm... More Info

£72.70 INC VAT

TREND C131X1/4TC BROKEN OGEE 2.4MM RAD X 10MM CUT

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm C=2... More Info

£72.70 INC VAT

TREND C133X1/4TC OVERLAP TRIM 12.7MM DIA

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm B=19.1 mm E... More Info

£46.97 INC VAT

TREND C134X1/4TC THREE FLUTE TRIM 12.7MM DIA

Three flute self-guiding for extra fine trimming of laminate or plywood overlay. Dimensions: D=1/2 inch D=12.7 mm C=1/2 inch C=12.7 mm B=12.7 ... More Info

£30.17 INC VAT

TREND C135X8MMTC PIERCE/TRIM 6.3MM DIA X 18MM CUT

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Dimensions: D=1/4 inch D=6.3 mm C=45/64 inch C=18 ... More Info

£30.17 INC VAT

TREND C138AX1/4TC GUIDED BEVEL 60 DEG X 34.9MM DIA

Ideal for posts and newel caps for stairs. Dimensions: D1=34.9 mm C=20.6 mm B=12.7 mm A=60 degrees Overall length=74.5 mm Shank Diameter=1/4 ... More Info

£51.36 INC VAT

TREND C138BX1/4TC GUIDED BEVEL 67.5 DEG X 30.9MM DIA

Ideal for posts and newel caps for stairs. Dimensions: D1=30.9 mm C=22 mm B=12.7 mm A=67.5 degrees Overall length=74.5 mm Shank Diameter=1/4 ... More Info

£51.36 INC VAT

TREND C138X1/4TC SELF G/CHAMFER 60 DEG X 12.7MM CUT

Ideal for posts and newel caps for stairs. Dimensions: D1=25.4 mm C=1/2 inches C=12.7 mm B=9.5 mm A=60 degrees Overall length=64 mm Shank Di... More Info

£46.97 INC VAT

TREND C139X1/4TC SELF G/CHAMFER 30 DEG X 7.0MM CUT

Cutter Promotion. Ideal for posts and newel caps for stairs. Dimensions: D1=35.1 mm C=9/32 inches C=7 mm B=9.5 mm A=30 degrees Shank Diamete... More Info

£53.57 INC VAT

TREND C140X1/4TC CORNER BEAD 3.2MM RAD

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=7/8 inch D=22.3 mm D2=20 mm ... More Info

£65.92 INC VAT

TREND C141X1/4TC PANEL/VEINING 4.8MM RAD

For decorative panel and veining work. Ideal for carving with the Routerlathe. Dimensions: D=3/8 inch D=9.5 mm C=7.5 mm R=4.8 mm Overall l... More Info

£39.10 INC VAT

TREND C142X1/4TC OGEE MOULD 7.5MM RAD X 27MM DIA

For panel and veining work. Ideal for barley twists using the Routerlathe. Dimensions: D=1 1/16 inch D=27 mm C=5/8 inch C=16 mm R=7.5 mm Over... More Info

£72.70 INC VAT

TREND C143AX8MMTC LOTTING 3.0MM CUT X 31.8MM DIA

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£39.10 INC VAT

TREND C143X1/4TC SLOTTING 3.2MM CUT

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£39.10 INC VAT

TREND C144AX8MMTC SLOTTING 4.0MM CUT X 31.8MM DIA

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£39.10 INC VAT

TREND C144X1/4TC SLOTTING 4.7MM CUT

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£39.10 INC VAT

Trend C145 x 1/4 TCT Slotting Cutter 6.3mm

This two wing slotting cutter is ideal for grooving and rebating operations. A 1/2in diameter bearing is supplied with every cutter. Depth of cut ca... More Info

£46.08 INC VAT

TREND C145AX8MMTC SLOTTING 6.0MM CUT X 31.8MM DIA

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£42.53 INC VAT

TREND C145X1/4TC SLOTTING 6.3MM CUT

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£42.53 INC VAT

TREND C146X1/4TC SLOTTING 8MM CUT

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£42.53 INC VAT

TREND C147X1/4TC SLOTTING 9.5MM CUT

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£44.65 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90]

Terms & Conditions

We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.