This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled.
Dimensions:
D...More Info
A double sunk bead with bearings fitted onto both shank and cutter, will create very attractive corner mouldings.
Dimensions:
D=25 mm
C=22 mm
B...More Info
Especially designed for routing Corian which is used in many bathrooms and kitchens. For trimming bowls, trepanning and face milling.
Dimensions...More Info
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
For bullnose mou...More Info
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
For bullnose mou...More Info
Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens.
For bullnose mou...More Info
Self guided tools for trimming inlay or overlaps.
Dimensions:
D=19 mm
C=25 mm
B=19 mm
A=90 degrees
Shank Diameter=1/2 inch
Shank Diameter: ...More Info
Self guided tools for trimming inlay or overlaps.
Dimensions:
D=28.6 mm
C=1 1/2 inch
C=38.1 mm
B=28.57 mm
A=90 degrees
Shank Diameter=1/2 inc...More Info
The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be ...More Info
A range of cutters for producing different types of cornice. Chamfers can be routed using a 45 degree cutter eg. Ref. 46/38. These cutters can also ...More Info
The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be ...More Info
Side profile for an attractive handrail.
Can be used in conjunction with four different cutters to produce different handrail tops.
Dimensions:
...More Info
Side profile for a handrail requiring a large grip.
Can be used in conjunction with four different cutters to produce different handrail tops.
D...More Info
Used to slot and trim low melting point plastics such as ABS, Styrene and PVC.
For maximum life these cutters are Solid Carbide.
Single flute fo...More Info
Used to slot and trim low melting point plastics such as ABS, Styrene and PVC.
For maximum life these cutters are Solid Carbide.
Two flute for f...More Info
Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic resin.
Dimensions:
D=1/2 inch
D...More Info
Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic resin.
Dimensions:
D=1/4 inch
D...More Info
The Trend AIR STEALTH Half Mask protects the user against airborne particles, oil aerosols, mist, welds and fumes. Fitted with a twin HEPAC pleat enca...More Info
Pair of P3(R) filters for the Trend AIR STEALTH half mask. The twin HEPAC pleat encapsulated filter design, provides 99.99% filtration of airborne par...More Info
Pair of P3(R) Nuisance Odour Filters for AIR STEALTH half mask. The Twin HEPAC* pleat encapsulated design provides 99.99% filtration of airborne...More Info