Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.
They cut fast, with the grain or across it.
They ca...More Info
Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.
They cut fast, with the grain or across it.
They ca...More Info
Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.
They cut fast, with the grain or across it.
They ca...More Info
Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.
They cut fast, with the grain or across it.
They ca...More Info
Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.
They cut fast, with the grain or across it.
They ca...More Info
Tungsten Carbide Tipped.
Two flute cutter with tips sheared up and down, giving a fine finish.
For trimming veneered and double-faced boards, plyw...More Info
For coves and part of a rule joint.
Dimensions:
D=1 1/2 inch
D=38.1 mm
C=1 1/4 inch
C=31.7 mm
R=3/4 inch
R=19.1 mm
Shank Diameter=1/2 inch
...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=3/8 inch
D=9.5 mm
C=7.5 mm
R=4.8 mm
Shank...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=13 mm
C=12.5 mm
R=6 mm
Shank Diameter=1/4 ...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=14.5 mm
C=19.5 mm
R=7.5 mm
Shank Diameter=...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM.
Matches our range of profile scribers.
Suitable for use on natur...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Ideal for following templates when panelling and profiling in furniture manufacture.
It is advisable that the template is at least 5mm thicker than...More Info
Shank mounted bearing follows template mounted on board surface.
It is advisable that the template is at least 5mm thicker than the cutter.
Dime...More Info
Shank mounted bearing follows template mounted on board surface.
It is advisable that the template is at least 5mm thicker than the cutter.
Dime...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
To create profiles in the face or edge of drawer fronts and cabinet doors.
Dimensions:
D=19 mm
D2=6.5 mm
C=11 mm
R=4 mm
Shank Diameter=1/4 inc...More Info
These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner ...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info