147 items are stocked by Corroy Products

Trend

TREND SNAP/FB/12 SNAPPY FLAT BIT 12MM
TREND SNAP/FB/12 SNAPPY FLAT BIT 12MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=12 mm ... More Info

£5.93 INC VAT
TREND SNAP/FB/16 SNAPPY FLAT BIT 16MM
TREND SNAP/FB/16 SNAPPY FLAT BIT 16MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=16 mm ... More Info

£5.93 INC VAT
TREND SNAP/FB/19 SNAPPY FLAT BIT 19MM
TREND SNAP/FB/19 SNAPPY FLAT BIT 19MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=19 mm ... More Info

£6.88 INC VAT
TREND SNAP/FB/22 SNAPPY FLAT BIT 22MM
TREND SNAP/FB/22 SNAPPY FLAT BIT 22MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=22 mm ... More Info

£6.88 INC VAT
TREND SNAP/FB/25 SNAPPY FLAT BIT 25MM
TREND SNAP/FB/25 SNAPPY FLAT BIT 25MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=25 mm ... More Info

£6.88 INC VAT
TREND SNAP/FB/30 SNAPPY FLAT BIT 30MM
TREND SNAP/FB/30 SNAPPY FLAT BIT 30MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=30 mm ... More Info

£7.82 INC VAT
Trend SNAP/FLIP/SET 4pc Flip Driver Set
Trend SNAP/FLIP/SET 4pc Flip Driver Set

A four piece drill countersinking and screwdriving flip over set.... More Info

£28.88 INC VAT
TREND SNAP/FLIP/SET SNAPPY FLIP DRIVER SET 4PC
TREND SNAP/FLIP/SET SNAPPY FLIP DRIVER SET 4PC

A four piece drill countersinking and screwdriving flip over set. Supplied with quick-change shank for fitting into Trend Snappy Quick Chuck. Dril... More Info

£24.76 INC VAT
TREND SNAP/FS/10 SNAPPY FORSTNER 10MM
TREND SNAP/FS/10 SNAPPY FORSTNER 10MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£17.70 INC VAT
TREND SNAP/FS/12 SNAPPY FORSTNER 12MM
TREND SNAP/FS/12 SNAPPY FORSTNER 12MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£17.70 INC VAT
TREND SNAP/FS/15 SNAPPY FORSTNER 15MM
TREND SNAP/FS/15 SNAPPY FORSTNER 15MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£19.56 INC VAT
TREND SNAP/FS/18 SNAPPY FORSTNER 18MM
TREND SNAP/FS/18 SNAPPY FORSTNER 18MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£20.67 INC VAT
TREND SNAP/FS/20 SNAPPY FORSTNER 20MM
TREND SNAP/FS/20 SNAPPY FORSTNER 20MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£24.18 INC VAT
TREND SNAP/FS/25 SNAPPY FORSTNER 25MM
TREND SNAP/FS/25 SNAPPY FORSTNER 25MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£26.99 INC VAT
TREND SNAP/FS/30 SNAPPY FORSTNER 30MM
TREND SNAP/FS/30 SNAPPY FORSTNER 30MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£29.59 INC VAT
TREND SNAP/FS/32 SNAPPY FORSTNER 32MM
TREND SNAP/FS/32 SNAPPY FORSTNER 32MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£44.06 INC VAT
TREND SNAP/FS/35 SNAPPY FORSTNER 35MM
TREND SNAP/FS/35 SNAPPY FORSTNER 35MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£29.59 INC VAT
TREND SNAP/GD/6MM SNAPPY GLASS DRILL 6MM
TREND SNAP/GD/6MM SNAPPY GLASS DRILL 6MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=6 mm Shank ... More Info

£10.77 INC VAT
TREND SNAP/GD/7MM SNAPPY GLASS DRILL 7MM
TREND SNAP/GD/7MM SNAPPY GLASS DRILL 7MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=7 mm Shank ... More Info

£11.75 INC VAT
Trend snap/hd/set drill set 7pc
Trend snap/hd/set drill set 7pc

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in th... More Info

£19.10 INC VAT
TREND SNAP/HD/SET SNAPPY HEX DRILL SET METRIC 7PC
TREND SNAP/HD/SET SNAPPY HEX DRILL SET METRIC 7PC

A set of seven quick change hex shank through hole drilling timber. Supplied in a storage tube. Dimensions: Shank Diameter=1/4 inch hex Drill ... More Info

£14.73 INC VAT
TREND SNAP/HEX/C SNAP HEX BIT BALL END 7MM & 8MM A/F
TREND SNAP/HEX/C SNAP HEX BIT BALL END 7MM & 8MM A/F

A 50mm ball end hex screwdriver bits. The ball hex allows a working angle up to 20 degree. Dimensions: Overall length=50 mm Size A/F=7 mm for M1... More Info

£21.15 INC VAT
Trend SNAP/HKLC/6 Key Chuck
Trend SNAP/HKLC/6 Key Chuck

Keyless chuck that can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch. Clamping capacity: 0.8 mm (1/32 ... More Info

£30.38 INC VAT
TREND SNAP/HKLC/6 SNAPPY HEX KEYLESS CHUCK 6MM CAP
TREND SNAP/HKLC/6 SNAPPY HEX KEYLESS CHUCK 6MM CAP

Keyless chuck that can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch. Clamping capacity 0.8mm (1/32 i... More Info

£28.20 INC VAT
TREND SNAP/IPH2/10 SNAPPY 25MM BIT PHILLIPS 2 TEN TIN
TREND SNAP/IPH2/10 SNAPPY 25MM BIT PHILLIPS 2 TEN TIN

A pack of 25mm Phillips insert bits Titanium Nitride (TiN) coated. Forged bit for strength and longer life. They have a round shaft to reduce breaka... More Info

£13.76 INC VAT
TREND SNAP/IPZ0/3 SNAPPY 25MM BIT POZI NO 0 THREE PK
TREND SNAP/IPZ0/3 SNAPPY 25MM BIT POZI NO 0 THREE PK

A pack of 25mm No. 0 Pozi insert bits High grade chrome-vanadium steel, through hardened to hardness HRC 59-61 and precision machined to exacting st... More Info

£6.50 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111]
Terms & Conditions
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.

© 2025 Corroy Products
Friday 2nd May 2025