Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timb...More Info
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timb...More Info
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timb...More Info
Ideal for speaker cabinets and drawer construction.
Please note. This tool cannot be re-sharpened.
Inverted use only.
Dimensions:
D=68 mm
C=...More Info
A quarter ellipse cutter for architraves and mould finishes.
For stationary machines - 12000 RPM recommended speed.
Dimensions:
D=69.2 mm
C=16.0...More Info
This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC.
For stationary machines - 12000...More Info
A reversible finger jointer, to increase the gluing area for edge to edge joints.
Dimensions:
D=40.0 mm
D2=31 mm
C=32 mm
Shank Diameter=1/2 inc...More Info
Popular rebate sets which include different size bearings for a choice of rebates.
Ease of setting-up and accurate depth of cut.
Ideal for rebating ...More Info
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners.
When using bearing Ref. B95A make two pa...More Info
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners.
When using bearing Ref. B95A make two pa...More Info
TCT cutter with staggered cutting surfaces.
Deep mortising and grooving giving good chip clearance.
For lock mortising, two width cuts will be need...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=50 mm
B=12.7 mm
...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=38 mm
B=12.7 mm
...More Info
Self-guiding chamfer/bevel cutter.
Bearing follows the board beneath.
Dimensions:
D=51 mm
C=19 mm
B=12.7 mm
A=45 degrees
Overall length=72.5 ...More Info
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a rou...More Info
Allows templates to be placed either on top or the bottom of the material, for ease of routing.
Dimensions:
D=19 mm
C=50 mm
B=19 mm
A=90 degree...More Info
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood an...More Info
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood an...More Info
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood an...More Info
Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool.
Dimensions:
D=35 mm
C=1...More Info
Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool.
Dimensions:
D=35 mm
C=1...More Info
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, comp...More Info
Self-guiding triple flute cutter.
Extra fine trimming and longer life.
For trimming of laminate or plywood overlay.
Dimensions:
D=1/2 inch
...More Info
Recessing cutter will accommodate the Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between sa...More Info
Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. This cutter is designed for use with the seal in a wiping mode ...More Info