Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth.
Supplied with two bearings.
The larger bearing...More Info
Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth.
Supplied with two bearings.
The larger bearing...More Info
Cut a wider edge line, at an angle of 60 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm bearing will spread the wear of the cutting...More Info
Cut a wider edge line, at an angle of 45 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm bearing will spread the wear of the cutting...More Info
Cut a wider edge line, at an angle of 30 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm bearing will spread the wear of the cutting...More Info
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.
Dimensions:
D=28 mm
C=19 mm
B=12.7...More Info
Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings.
Dimensio...More Info
Trimming top and bottom surfaces simultaneously with bearing following the board.
Two fluted.
Increased productivity.
Dimensions:
D=18 mm
C...More Info
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.
Dimensions:
D=27 mm
C=17 mm
C2=13...More Info
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.
Dimensions:
D=27 mm
C=17 mm
B=9.5 ...More Info
Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.An industrial profiling tool f...More Info
Self-guiding triple flute cutter.
Extra fine trimming and longer life.
For trimming of laminate or plywood overlay etc.
Ref 46/82 has twin be...More Info
Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.This trimmer has twin bearings...More Info
Self-guiding triple flute cutter.
Extra fine trimming and longer life.
For trimming of laminate or plywood overlay etc.
Ref 46/82 has twin be...More Info
Self-guiding triple flute cutter.
Extra fine trimming and longer life.
For trimming of laminate or plywood overlay etc.
A 2mm maximum overlap...More Info
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutte...More Info
Profiler with shank mounted bearing guides.
For use with router mounted above or below a table when following a template.
For profiling and rebati...More Info
Profiler with shank mounted bearing guides.
For use with router mounted above or below a table when following a template.
For profiling and rebati...More Info
Profiler with shank mounted bearing guides.
For use with router mounted above or below a table when following a template.
For profiling and rebati...More Info