Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size co...More Info
One piece collet for the T3EK.
Does not include the collet nut.
Dimensions:
d=3 mm
Body length=20 mm
Body dia mouth.=12.2 mm
Body dia base.=...More Info
One piece collet for the T4EK.
Does not include the collet nut.
Dimensions:
d=6 mm
Body length=20 mm
Body dia mouth.=12.2 mm
Body dia base.=...More Info
One piece collet for the T4EK.
Does not include the collet nut.
Dimensions:
d=1/4 inch
d=6.35 mm
Body length=20 mm
Body dia mouth.=12.2 mm
...More Info
One piece collet for the T4EK.
Does not include the collet nut.
Dimensions:
d=8 mm
Body length=20 mm
Body dia mouth.=12.2 mm
Body dia base.=...More Info
The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank.
Does not include the collet nut.
D...More Info
Collar Packs are used for cutters with shank mounted bearings.
Packs include one collar, grub screw and hex key.
Dimensions:
ID=1/2 inch
OD=18...More Info
Collar Packs are used for cutters with shank mounted bearings.
Packs include one collar, grub screw and hex key.
Dimensions:
ID=1/2 inch
OD=20...More Info
Collar Packs are used for cutters with shank mounted bearings. Packs include one collar, grub screw and hex key.
Dimensions:
ID=1/4 inch
OD=11 ...More Info
Collar Packs are used for cutters with shank mounted bearings.
Packs include one collar, grub screw and hex key.
Dimensions:
ID=1/4 inch
OD...More Info
Collar Packs are used for cutters with shank mounted bearings.
Packs include one collar, grub screw and hex key.
Dimensions:
ID=3/8 inch
OD=15...More Info
Collar Packs are used for cutters with shank mounted bearings. Packs include one collar, grub screw and hex key.
Dimensions:
ID=8 mm
OD=14 mm
H...More Info
Six tungsten carbide teeth. Anti-kickback tool design for safer use. Suitable for natural timbers, particle and MDF boards.
Dimensions:
D=100...More Info
Six tungsten carbide teeth. Anti-kickback tool design for safer use. Suitable for natural timbers, particle and MDF boards.
Thin body for use with...More Info
Economy range clamp, ideal for securing workpiece either onto jigs or to the surface of the machine.
Dimensions:
Clamping force=150 kg
E=50 mm
A...More Info
Packs of cutters aimed at kitchen fitters.
Pack includes 1/2 inch diameter worktop cutters, biscuit jointer cutter, three connecting bolts and ten ...More Info
Packs of cutters aimed at kitchen fitters.
Packs include 1/2 inch diameter worktop cutters.
Dimensions:
Straight two flute
D=12.7 mm x 50mm cu...More Info
Packs of cutters aimed at kitchen fitters.
Pack includes 1/2 inch diameter worktop cutters.
Dimensions:
D=12.7 mm
C=50 mm
Overall length=93.5...More Info
Packs of cutters aimed at kitchen fitters.
Pack includes 1/2 inch diameter worktop cutters.
Dimensions:
D=12.7 mm
C=50 mm
Overall length=93....More Info