Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approx. 1.0mm flat will be found on nose.
Dimensions:
D=1/2 ...More Info
Use for bevelling and chamfering.
A flat, approximately 1.0mm, will be found on V Groove tip.
Ref. 11/3 is ideal for imitating 'V' jointed tongu...More Info
Chamfer V grooving cutters are used for bevelling, chamfering and producing motar grooves. Due to design an approx. 1.0 mm flat will be found on the ...More Info
Chamfer V grooving cutters are used for bevelling, chamfering and producing motar grooves. Due to design an approx. 1.0 mm flat will be found on the ...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approx. 1.0mm flat will be found on nose.
Dimensions:
D=1/2 ...More Info
Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0 mm flat will be found on nose.Ideal for imitating 'V' jointed tongue and g...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...More Info
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Tool Ref....More Info
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such a...More Info