147 items are stocked by Corroy Products

Trend

TREND C033TX1/2TC TWO FLUTE 44.5MM DIA X 25MM CUT
TREND C033TX1/2TC TWO FLUTE 44.5MM DIA X 25MM CUT

Click here for more information. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on sof... More Info

£79.72 INC VAT
TREND C033VX1/2TC TWO FLUTE 47.6MM DIA X 32MM CUT
TREND C033VX1/2TC TWO FLUTE 47.6MM DIA X 32MM CUT

Click here for more information. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on sof... More Info

£79.72 INC VAT
TREND C033WX1/2TC TWO FLUTE 50MM DIA X 25MM CUT
TREND C033WX1/2TC TWO FLUTE 50MM DIA X 25MM CUT

Click here for more information. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on sof... More Info

£81.48 INC VAT
TREND C033X1/2TC TWO FLUTE 25.4MM DIA X 19.1MM CUT
TREND C033X1/2TC TWO FLUTE 25.4MM DIA X 19.1MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£34.66 INC VAT
TREND C033X1/4TC TWO FLUTE 25.4MM DIA X 19.1MM CUT
TREND C033X1/4TC TWO FLUTE 25.4MM DIA X 19.1MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£34.66 INC VAT
TREND C033YX1/2TC TWO FLUTE 50.8MM DIA X 25MM CUT
TREND C033YX1/2TC TWO FLUTE 50.8MM DIA X 25MM CUT

Click here for more information. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on sof... More Info

£81.48 INC VAT
TREND C034AX1/4TC SINGLE FLUTE 2.0MM DIA X 5MM CUT
TREND C034AX1/4TC SINGLE FLUTE 2.0MM DIA X 5MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£22.34 INC VAT
TREND C034BX1/4TC SINGLE FLUTE 1.5MM DIA X 6MM CUT
TREND C034BX1/4TC SINGLE FLUTE 1.5MM DIA X 6MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£23.92 INC VAT
TREND C034CX1/4TC SINGLE FLUTE 3MM DIA X 11MM CUT
TREND C034CX1/4TC SINGLE FLUTE 3MM DIA X 11MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£25.72 INC VAT
TREND C034X1/4TC ONE FLUTE 3.2MM DIA X 11.1MM CUT
TREND C034X1/4TC ONE FLUTE 3.2MM DIA X 11.1MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£21.24 INC VAT
TREND C035X1/4TC ONE FLUTE 4MM DIA X 11.1MM CUT
TREND C035X1/4TC ONE FLUTE 4MM DIA X 11.1MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£21.24 INC VAT
TREND C036X1/4TC ONE FLUTE 4.8MM DIA X 11.1MM CUT
TREND C036X1/4TC ONE FLUTE 4.8MM DIA X 11.1MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£24.66 INC VAT
TREND C037X1/4TC ONE FLUTE 6.3MM DIA X 12.7MM CUT
TREND C037X1/4TC ONE FLUTE 6.3MM DIA X 12.7MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£17.84 INC VAT
TREND C039X1/4TC ONE FLUTE 6.3MM DIA X 25.4MM CUT
TREND C039X1/4TC ONE FLUTE 6.3MM DIA X 25.4MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£21.24 INC VAT
Trend C040 x 1/4 TCT Self Guided Rebater
Trend C040 x 1/4 TCT Self Guided Rebater

This cutter is self guiding and can be used to produce rebates, lapjoints, tongues and rebated corners. Alternative bearings can be purchased to vary... More Info

£53.18 INC VAT
TREND C040AX1/2TC GUIDED LARGE REBATER 50.8MM DIA
TREND C040AX1/2TC GUIDED LARGE REBATER 50.8MM DIA

Bearing guided for straight or curved work. For portable and stationary routers. Supplied as standard with Ref. BR/191 fitted. A variety of all... More Info

£93.28 INC VAT
TREND C040X1/2TC SELF G/REBAT 35MM DIA X 12.7MM CUT
TREND C040X1/2TC SELF G/REBAT 35MM DIA X 12.7MM CUT

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two pa... More Info

£56.98 INC VAT
TREND C040X1/4TC SELF G/REBAT 35MM DIA X 12.7MM CUT
TREND C040X1/4TC SELF G/REBAT 35MM DIA X 12.7MM CUT

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two pa... More Info

£49.08 INC VAT
TREND C040X8MMTC SELF G/REBAT 35MM DIA X 12.7MM CUT
TREND C040X8MMTC SELF G/REBAT 35MM DIA X 12.7MM CUT

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two pa... More Info

£49.08 INC VAT
TREND C041AX1/4TC DOVETAIL A=104 DEG 12.7MM DIA EX-L
TREND C041AX1/4TC DOVETAIL A=104 DEG 12.7MM DIA EX-L

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dove... More Info

£29.14 INC VAT
TREND C041AX8MMTC DOVETAIL A=104 DEG X 12.7MM D EX-L
TREND C041AX8MMTC DOVETAIL A=104 DEG X 12.7MM D EX-L

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dove... More Info

£29.14 INC VAT
TREND C041X1/4TC DOVETAIL A=104 DEG X 12.7MM DIA
TREND C041X1/4TC DOVETAIL A=104 DEG X 12.7MM DIA

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dove... More Info

£28.06 INC VAT
TREND C041X8MMTC DOVETAIL A=104 DEG X 12.7MM DIA
TREND C041X8MMTC DOVETAIL A=104 DEG X 12.7MM DIA

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dove... More Info

£28.06 INC VAT
TREND C042X1/4TC DOVETAIL A=99 DEG X 9.5MM DIA
TREND C042X1/4TC DOVETAIL A=99 DEG X 9.5MM DIA

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dove... More Info

£28.06 INC VAT
TREND C043AX1/4TC CHAMFER V GROOVE 60 DEG X 19MM DIA
TREND C043AX1/4TC CHAMFER V GROOVE 60 DEG X 19MM DIA

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions: D=3/4 inch D=19.1 mm Overall length=70.5 mm A=60 degrees Shank Diame... More Info

£33.68 INC VAT
TREND C043CX1/4TC TRIPLE FLUTE ENGRAVER 60 DEG
TREND C043CX1/4TC TRIPLE FLUTE ENGRAVER 60 DEG

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. Dimensions: D=1... More Info

£51.36 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90]
Terms & Conditions
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.

© 2025 Corroy Products
Monday 15th September 2025