Trend at Corroy Products

Shop By Brand

Browse By Brand

Trend

TREND 50/10X8MMHSSE HELICAL PLUNGE 10MM DIA

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£34.58 INC VAT

TREND 50/14X10MMHSSE HELICAL PLUNGE 10MM DIA

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£50.86 INC VAT

TREND 50/15X8MMHSSE HELICAL PLUNGE 4MM DIA

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£43.56 INC VAT

TREND 50/17X8MMHSSE HELICAL PLUNGE 5MM DIA

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£43.56 INC VAT

TREND 50/18X8MMHSSE HELICAL PLUNGE 8MM DIA

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£40.96 INC VAT

Trend 50/19 x 8mm HSSE Speed Steele Helical Plunge Bit 5 mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ens... More Info

£50.76 INC VAT

TREND 50/19X1/4HSSE HELICAL PLUNGE 5MM DIA

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£40.60 INC VAT

TREND 50/19X8MMHSSE HELICAL PLUNGE 5MM DIA

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£39.04 INC VAT

TREND 50/20X8MMHSSE HELICAL PLUNGE 8MM DIA

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mat... More Info

£71.86 INC VAT

TREND 50/25X8MMHSSE HELICAL PLUNGE 5MM DIA

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mat... More Info

£29.04 INC VAT

TREND 50/26X8MMHSSE HELICAL PLUNGE 5MM DIA

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mat... More Info

£53.88 INC VAT

TREND 50/27X8MMHSSE HELICAL PLUNGE 5MM DIA

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mat... More Info

£64.50 INC VAT

TREND 50/31X8MMHSSE WATER SLOT 6MM DIA X 40MM CUT

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or... More Info

£52.04 INC VAT

TREND 50/33X8MMHSSE WATER SLOT 5MM DIA X 40MM CUT

Two flute helical up-cut cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutters are designed to plunge and machine or ... More Info

£57.22 INC VAT

TREND 50/36X8MMHSSE WATER SLOT 5MM DIA X 30MM CUT

For drilling and slotting uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. Material should be securely clamped. Si... More Info

£59.96 INC VAT

TREND 50/50X8MMHSSE WATER SLOT 5MM DIA X 14MM CUT

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mat... More Info

£40.96 INC VAT

Trend 50/51 x 8mm HSSE Helical Plunge Bit 8 mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ens... More Info

£54.28 INC VAT

TREND 50/51X8MMHSSE WATER SLOT 8MM DIA X 14MM CUT

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mat... More Info

£41.76 INC VAT

TREND 50/52X8MMHSSE HELICAL PLUNGE 6MM DIA

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mat... More Info

£39.04 INC VAT

TREND 501/1132HSS TWIST DRILL 11/32 DIA

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are... More Info

£23.36 INC VAT

TREND 501/14HSS TWIST DRILL 1/4 X 6.3MM DIA

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are... More Info

£15.28 INC VAT

TREND 501/516HSS TWIST DRILL 5/16 DIA

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are... More Info

£19.98 INC VAT

TREND 501/732HSS TWIST DRILL 7/32 DIA

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are... More Info

£10.90 INC VAT

TREND 501/932HSS TWIST DRILL 9/32 DIA

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are... More Info

£26.96 INC VAT

TREND 53/30X1/2TC SHEAR 9.5MM DIA X 25MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£50.21 INC VAT

TREND 53/30X1/4TC SHEAR 9.5MM DIA X 25MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£46.86 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118]

Terms & Conditions

We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.