Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
These are made from a single piece of High Speed Steel, ground with a very fine edge.
They are only suitable for non abrasive materials, but will g...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=3/4 inch
D=19....More Info
Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=3/4 inch
D=19....More Info
Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=1 inch
D=25.4 ...More Info
Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=1 1/2 inch
D=3...More Info
Produces an elegant edge mould, or a shallow panel effect when routing on its full width.
Dimensions:
D=20 mm
C=15 mm
R=6 mm
Shank Diameter=1/2...More Info
Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails.
Dimensions:
D=41.5 mm
C=8 mm
C2=8 mm
R=19 ...More Info
Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails.
Dimensions:
D=50 mm
C=6.5 mm
C2=11.5 mm
R=...More Info
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.
These have f...More Info
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.
These have f...More Info
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.
These have f...More Info
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.
These have f...More Info
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.
These have f...More Info
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.
These have f...More Info
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.
These have f...More Info
These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /mi...More Info