Designed solely for use in the engineering industry for use with diamond abrasives and used for more than 30 years.
WD 40 or other such lubricants ar...More Info
Precision quality needle files as used in the British aerospace Industry and as supplied to the like of Rolls Royce.
Fine 600 grit (25 micron)
Guara...More Info
The most unique versatile half round/flat tapered file suitable for woodworking, gardening & domestic tooling.
Precision quality taper file.
Fine 60...More Info
Designed to enable virtually any router to cut ellipses and circles.
Useds for corner tables, arches, desks and mirrors.
Setting-up and operating is...More Info
Brookman cutters are in TCT grade with 3/8 B.S.F threaded shanks.
Dimensions:
D=9/16 inch
C=15/32 inch
A=100 degrees
Shank Diameter=Threaded
W...More Info
Brookman cutters are in TCT grade with 3/8 B.S.F threaded shanks.
Dimensions:
D=9/16 inch
C=15/32 inch
A=100 degrees
Shank Diameter=Threaded
W...More Info
Brookman cutters are in TCT grade with 3/8 B.S.F threaded shanks.
Dimensions:
D=9/16 inch
C=15/32 inch
A=100 degrees
Shank Diameter=Threaded
W...More Info
A concise range of F-Style quick action gripper clamps for a variety of clamping applications.
Zinc plated steel bar with cast steel head and jaw.
S...More Info
A concise range of F-Style quick action gripper clamps for a variety of clamping applications.
Zinc plated steel bar with cast steel head and jaw.
S...More Info
A concise range of F-Style quick action gripper clamps for a variety of clamping applications.
Zinc plated steel bar with cast steel head and jaw.
S...More Info
Flush cut pull saw for trimming of plug/pellet and dovetail joints.
Teeth have no set, so they can cut right at the surface.
Pull saw (cuts on back ...More Info
This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.
They are especially useful for accurate work...More Info
This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.
They are especially useful for accurate work...More Info
This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.
They are especially useful for accurate work...More Info
Replacement finishing stone for the Fasttrack sharpening system
Dimensions:
Size=75 mm x 24 mm x 4 mm
Grade=Fine coarse
Grit=450 (nom. 35 micron...More Info
Fine finish stone for the Fasttrack sharpening system.
Dimensions:
Size=75 mm x 24 mm x 4 mm
Grade=Fine
Grit=600 (nom. 25 micron)
Colour=Red...More Info
Replacement preparation stone for the Fasttrack sharpening system
Dimensions:
Size=68.5 mm x 25.4 mm x 3.6 mm
Grade=Extra coarse
Grit=220 (nom. ...More Info
Roughing stone for the Fasttrack sharpening system.
Dimensions:
Size=75 mm x 24 mm x 4 mm
Grade=Extra extra coarse
Grit=90-120 (nom. 120 micron)...More Info
Super fine finish stone for the Fasttrack sharpening system.
Dimensions:
Size=68.5 mm x 25.4 mm x 3.6 mm
Grade=Super fine
Grit=1200 (nom. 9 micr...More Info