Trend at Corroy Products

Shop By Brand

Browse By Brand

Trend

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£26.33 INC VAT

TREND SNAP/FS/30 SNAPPY FORSTNER 30MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£28.87 INC VAT

TREND SNAP/FS/32 SNAPPY FORSTNER 32MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£34.74 INC VAT

TREND SNAP/FS/35 SNAPPY FORSTNER 35MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Will also dri... More Info

£28.87 INC VAT

TREND SNAP/GD/6MM SNAPPY GLASS DRILL 6MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=6 mm Shank ... More Info

£10.51 INC VAT

TREND SNAP/GD/7MM SNAPPY GLASS DRILL 7MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=7 mm Shank ... More Info

£11.46 INC VAT

Trend snap/hd/set drill set 7pc

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in th... More Info

£18.64 INC VAT

TREND SNAP/HD/SET SNAPPY HEX DRILL SET METRIC 7PC

A set of seven quick change hex shank through hole drilling timber. Supplied in a storage tube. Dimensions: Shank Diameter=1/4 inch hex Drill ... More Info

£14.37 INC VAT

TREND SNAP/HEX/C SNAP HEX BIT BALL END 7MM & 8MM A/F

A 50mm ball end hex screwdriver bits. The ball hex allows a working angle up to 20 degree. Dimensions: Overall length=50 mm Size A/F=7 mm for M1... More Info

£21.15 INC VAT

Trend SNAP/HKLC/6 Key Chuck

Keyless chuck that can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch. Clamping capacity: 0.8 mm (1/32 ... More Info

£29.64 INC VAT

TREND SNAP/HKLC/6 SNAPPY HEX KEYLESS CHUCK 6MM CAP

Keyless chuck that can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch. Clamping capacity 0.8mm (1/32 i... More Info

£27.52 INC VAT

TREND SNAP/IPH2/10 SNAPPY 25MM BIT PHILLIPS 2 TEN TIN

A pack of 25mm Phillips insert bits Titanium Nitride (TiN) coated. Forged bit for strength and longer life. They have a round shaft to reduce breaka... More Info

£13.42 INC VAT

TREND SNAP/IPZ0/3 SNAPPY 25MM BIT POZI NO 0 THREE PK

A pack of 25mm No. 0 Pozi insert bits High grade chrome-vanadium steel, through hardened to hardness HRC 59-61 and precision machined to exacting st... More Info

£6.34 INC VAT

TREND SNAP/IPZ2/10 SNAPPY 25MM BIT POZI NO2 TEN TIN

A pack of 25mm Pozi insert bits Titanium Nitride (TiN) coated. Forged bit for strength and longer life. They have a round shaft to reduce breakage g... More Info

£13.42 INC VAT

Trend SNAP/MAG Magnetic Holder For Screws

Magnetic screwdriver holder. Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring. Accepts 25 mm insert bit... More Info

£20.00 INC VAT

TREND SNAP/MAG SNAPPY MAGNETIC HOLDER FOR SCREWS

Designed to hold longer screws securely onto the screwdriver bit with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barre... More Info

£15.43 INC VAT

TREND SNAP/MB/35TC SNAPPY MACHINE BIT 35MM DIA TC

For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. The 15mm machine bit is designed ... More Info

£23.43 INC VAT

TREND SNAP/MB/40TC SNAPPY MACHINE BIT 40MM DIA TC

For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. The 15mm machine bit is designed ... More Info

£23.95 INC VAT

TREND SNAP/MD/10 SNAPPY MASONRY DRILL 10MMX150MM TC

Tungsten Carbide Tipped masonry drill to suit wall plugs. Dimensions: D=10 mm OL=150 mm Flute length=95 mm Shank Length=1/4 inch hex Shan... More Info

£8.76 INC VAT

TREND SNAP/MD/12 SNAPPY MASONRY DRILL 12MMX150MM TC

Tungsten Carbide Tipped masonry drill to suit wall plugs. Dimensions: D=12 mm OL=150 mm Flute length=95 mm Shank Length=1/4 inch hex Shan... More Info

£8.76 INC VAT

TREND SNAP/MD/5 SNAPPY MASONRY DRILL 5MMX105MM TC

Tungsten Carbide Tipped masonry drill to suit wall plugs. Dimensions: D=5 mm OL=105 mm Flute length=44 mm Shank Diameter=1/4 inch hex Sha... More Info

£5.12 INC VAT

TREND SNAP/MD2/SET SNAPPY MASONRY DRILL 5PC DEPTH BAND

Tungsten Carbide Tipped masonry drill bit set with colour depth bands to suit wall plugs. Colour bands on drills allow easy selection of wall plug a... More Info

£30.58 INC VAT

TREND SNAP/MSH SNAPPY MAGNETIC DRIVE/HOLDER & POZI

Magnetic screwdriver bit holder will hold screws onto 25mm insert bits. Retractable rubberised barrel ensures screwdriver bits do not jump out of scr... More Info

£7.06 INC VAT

TREND SNAP/MSH/12 SNAPPY MAG DRIVER NO 12 C/W N03POZI

A larger size Trend Snappy Magnetic Bit Holder for 25mm insert bits with retractable barrel. For use with screw sizes up to No 12. Dimensions: Ov... More Info

£9.09 INC VAT

TREND SNAP/ND/10M SNAPPY NUTDRIVER 10MM A/F MAGNETIC

A high quality magnetic nut driver. Ideal for bolts. Dimensions: OL=65 mm Shank Diameter=1/4 inch hex A/F=10 mm To suit hex bolt thread size... More Info

£14.37 INC VAT

TREND SNAP/ND/13M SNAPPY NUTDRIVER 13MM A/F MAGNETIC

A high quality magnetic nut driver. Ideal for bolts. Dimensions: OL=65 mm Shank Diameter=1/4 inch hex A/F=13 mm To suit hex bolt thread size... More Info

£17.27 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118]

Terms & Conditions

We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.