147 items are stocked by Corroy Products

Trend

TREND C117BX1/2TC TRIMMING 19.1MM DIA X 50MM CUT
TREND C117BX1/2TC TRIMMING 19.1MM DIA X 50MM CUT

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D1=3/4 inch D1=19.1 mm C=50 mm Overall l... More Info

£62.02 INC VAT
TREND C117X1/4TC GUIDED TRIMMER 15.9MM DIA
TREND C117X1/4TC GUIDED TRIMMER 15.9MM DIA

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=5/8 inch D=15.9 mm C=5/8 inch C=15.9 m... More Info

£34.66 INC VAT
TREND C119X1/4TC S/GUIDED BEVEL TRIM A=65ˇ
TREND C119X1/4TC S/GUIDED BEVEL TRIM A=65ˇ

This is bearing guided and gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. Dimensions: C=1/4 ... More Info

£26.77 INC VAT
TREND C120X1/4TC KEYHOLE 9.5MM DIA
TREND C120X1/4TC KEYHOLE 9.5MM DIA

For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. For No8 & No1... More Info

£34.66 INC VAT
Trend C121 x 1/4 TCT Template Profile 1/4in
Trend C121 x 1/4 TCT Template Profile 1/4in

These trimmers with shank mounted bearings are ideal for template guidance. Use for rebating and trimming edges. Extra care must be taken to avoide b... More Info

£36.38 INC VAT
TREND C121AX8MMTC TEMPLATE/PROFILE 16.0MM DIA
TREND C121AX8MMTC TEMPLATE/PROFILE 16.0MM DIA

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid c... More Info

£41.42 INC VAT
TREND C121BX1/4TC PROFILER 12.7MM X 9.5MM CUT
TREND C121BX1/4TC PROFILER 12.7MM X 9.5MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid c... More Info

£28.34 INC VAT
TREND C121CX1/4TC PROFILER 16MM DIA X 25MM
TREND C121CX1/4TC PROFILER 16MM DIA X 25MM

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid c... More Info

£44.32 INC VAT
TREND C121DX1/4TC PROFILER 12.7MM DIA X 32MM CUT
TREND C121DX1/4TC PROFILER 12.7MM DIA X 32MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid c... More Info

£31.26 INC VAT
TREND C121EX1/4TC PROFILER 15.9MM DIA X 12.7MM CUT
TREND C121EX1/4TC PROFILER 15.9MM DIA X 12.7MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid c... More Info

£31.26 INC VAT
TREND C121X1/4TC TEMPLATE/PROFILE 12.7MM DIA
TREND C121X1/4TC TEMPLATE/PROFILE 12.7MM DIA

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid c... More Info

£33.59 INC VAT
TREND C122X1/4TC CAVETTO 7.9MM RAD X 15.9MM CUT
TREND C122X1/4TC CAVETTO 7.9MM RAD X 15.9MM CUT

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. Dimensions: C=5/8 inch C=15.9 mm D=34.5 mm ... More Info

£72.70 INC VAT
TREND C123X1/4TC TEMPLATE/PROFILE 19.1MM DIA
TREND C123X1/4TC TEMPLATE/PROFILE 19.1MM DIA

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cut... More Info

£43.60 INC VAT
TREND C124X1/4TC STRAIGHT 12.7MM DIA X 12.7MM CUT
TREND C124X1/4TC STRAIGHT 12.7MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£19.14 INC VAT
TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT
TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£21.24 INC VAT
TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT
TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=1/2 inch D=12.7 mm C=23/64 inch C=9 mm R=4.... More Info

£30.17 INC VAT
TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT
TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=5/8 inch D=15.9 mm C=13.5 mm R=6.3 mm Overa... More Info

£32.53 INC VAT
TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT
TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=7/8 inch D=22.2 mm C=19/32 inch C=15 mm R=9... More Info

£38.05 INC VAT
Trend C130 x 1/4 TCT Corner Bead
Trend C130 x 1/4 TCT Corner Bead

Attractive edge moulds, a full corner bead can be produced by making a second pass at 90° . Used on all man-made boards such as medium density fib... More Info

£78.76 INC VAT
TREND C130X1/4TC CORNER BEAD 4.8MM RAD X 26MM DIA
TREND C130X1/4TC CORNER BEAD 4.8MM RAD X 26MM DIA

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm... More Info

£72.70 INC VAT
TREND C131X1/4TC BROKEN OGEE 2.4MM RAD X 10MM CUT
TREND C131X1/4TC BROKEN OGEE 2.4MM RAD X 10MM CUT

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm C=2... More Info

£72.70 INC VAT
TREND C131X8MMTC BROKEN OGEE 2.4MM RAD X 10MM CUT
TREND C131X8MMTC BROKEN OGEE 2.4MM RAD X 10MM CUT

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm C=2... More Info

£70.92 INC VAT
TREND C133X1/4TC OVERLAP TRIM 12.7MM DIA
TREND C133X1/4TC OVERLAP TRIM 12.7MM DIA

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm B=19.1 mm E... More Info

£46.97 INC VAT
TREND C133X8MMTC OVERLAP TRIM 12.7MM DIA
TREND C133X8MMTC OVERLAP TRIM 12.7MM DIA

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm B=19.1 mm E... More Info

£45.83 INC VAT
TREND C134X1/4TC THREE FLUTE TRIM 12.7MM DIA
TREND C134X1/4TC THREE FLUTE TRIM 12.7MM DIA

Three flute self-guiding for extra fine trimming of laminate or plywood overlay. Dimensions: D=1/2 inch D=12.7 mm C=1/2 inch C=12.7 mm B=12.7 ... More Info

£30.17 INC VAT
TREND C135X8MMTC PIERCE/TRIM 6.3MM DIA X 18MM CUT
TREND C135X8MMTC PIERCE/TRIM 6.3MM DIA X 18MM CUT

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Dimensions: D=1/4 inch D=6.3 mm C=45/64 inch C=18 ... More Info

£30.17 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111]
Terms & Conditions
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.

© 2025 Corroy Products
Friday 2nd May 2025