36 items are stocked by Corroy Products

DeWalt

DeWalt DT5062QZ Extreme 2 Metal Drillbit 13.0 x 151mm
DeWalt DT5062QZ Extreme 2 Metal Drillbit 13.0 x 151mm

The DeWalt EXTREME 2™ metal tip starts drilling on contact eliminating walking for clean, accurate holes. The drill bits have the following feat... More Info

£17.93 INC VAT
DeWalt DT5063QZ Extreme 2 Metal Drillbit 4.1x75mm
DeWalt DT5063QZ Extreme 2 Metal Drillbit 4.1x75mm

The DeWalt EXTREME 2™ metal tip starts drilling on contact eliminating walking for clean, accurate holes. The drill bits have the following feat... More Info

£3.80 INC VAT
DeWalt DT5921QZ Extreme Metal Drillbit Set (9)
DeWalt DT5921QZ Extreme Metal Drillbit Set (9)

These metal drillbit sets contain drillbits suitable for portable or stationary drilling of steel, alloyed and non alloyed up to 900N/mm. They are pa... More Info

£34.38 INC VAT
DeWalt DT6515QZ Multi Material Drill Bit 3mm
DeWalt DT6515QZ Multi Material Drill Bit 3mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£3.21 INC VAT
DeWalt DT6516QZ Multi Material Drill Bit 3.5mm
DeWalt DT6516QZ Multi Material Drill Bit 3.5mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£3.53 INC VAT
DeWalt DT6517QZ Multi Material Drill Bit 3mm
DeWalt DT6517QZ Multi Material Drill Bit 3mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£4.01 INC VAT
DeWalt DT6518QZ Multi Material Drill Bit 5mm
DeWalt DT6518QZ Multi Material Drill Bit 5mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£4.21 INC VAT
DeWalt DT6519QZ Multi Material Drill Bit 6mm
DeWalt DT6519QZ Multi Material Drill Bit 6mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£4.56 INC VAT
DeWalt DT6520QZ Multi Material Drill Bit 6.5mm
DeWalt DT6520QZ Multi Material Drill Bit 6.5mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£4.95 INC VAT
DeWalt DT6521QZ Multi Material Drill Bit 7mm
DeWalt DT6521QZ Multi Material Drill Bit 7mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£5.85 INC VAT
DeWalt DT6522QZ Multi Material Drill Bit 8mm
DeWalt DT6522QZ Multi Material Drill Bit 8mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£6.04 INC VAT
DeWalt DT6524QZ Multi Material Drill Bit 10mm
DeWalt DT6524QZ Multi Material Drill Bit 10mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£6.55 INC VAT
DeWalt DT6525QZ Multi Material Drill Bit 12mm
DeWalt DT6525QZ Multi Material Drill Bit 12mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£8.81 INC VAT
DeWalt DT6526QZ Multi Material Drill Bit 13mm
DeWalt DT6526QZ Multi Material Drill Bit 13mm

These multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a f... More Info

£12.96 INC VAT
DeWalt DT6801QZ SDS Plus Steel Point - 250mm Long
DeWalt DT6801QZ SDS Plus Steel Point - 250mm Long

DeWalt SDS Plus Steel Point. Made from specially toughened steel and with micro-processor controlled heat treatment to ensure that it is tough with a... More Info

£19.96 INC VAT
DeWalt DT6802QZ SDS Plus Steel Flat - 250mm Long x 20mm Wide
DeWalt DT6802QZ SDS Plus Steel Flat - 250mm Long x 20mm Wide

DeWalt SDS Plus Steel Flat. Made from specially toughened steel and with micro-processor controlled heat treatment to ensure that it is tough a long l... More Info

£19.96 INC VAT
DeWalt DT6803QZ SDS Plus Steel Spade - 200mm Long x 40mm Wide
DeWalt DT6803QZ SDS Plus Steel Spade - 200mm Long x 40mm Wide

DeWalt SDS Plus Steel Spade. Made from specially toughened steel and with micro-processor controlled heat treatment to ensure that it is tough with a ... More Info

£30.48 INC VAT
DeWalt DT6805QZ SDS Plus Steel - Gouge/hollow
DeWalt DT6805QZ SDS Plus Steel - Gouge/hollow

DeWalt SDS Plus Steel Gouge/Hollow. Made from specially toughened steel and with micro-processor controlled heat treatment to ensure that it is tough ... More Info

£36.90 INC VAT
DeWalt DT6806QZ SDS Plus Steel - Tile/scaling
DeWalt DT6806QZ SDS Plus Steel - Tile/scaling

DeWalt SDS Plus Steel Tile/Scaling. Made from specially toughened steel and with micro-processor controlled heat treatment to ensure that it is tough ... More Info

£33.82 INC VAT
DeWalt DT6820QZ SDS Max Steel Point - 280mm
DeWalt DT6820QZ SDS Max Steel Point - 280mm

The DeWalt SDS Max steel points have toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment for consis... More Info

£29.28 INC VAT
DeWalt DT6821QZ SDS Max Steel Point - 400mm
DeWalt DT6821QZ SDS Max Steel Point - 400mm

The DeWalt SDS Max steel points have toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment for consis... More Info

£34.39 INC VAT
DeWalt DT6822QZ SDS Max Steel Flat 25mm - 300mm Length
DeWalt DT6822QZ SDS Max Steel Flat 25mm - 300mm Length

The DeWalt SDS Max steel chisels are made from toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment ... More Info

£29.28 INC VAT
DeWalt DT6823QZ SDS Max Steel Flat 25mm - 400mm Length
DeWalt DT6823QZ SDS Max Steel Flat 25mm - 400mm Length

The DeWalt SDS Max steel chisels are made from toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment ... More Info

£34.39 INC VAT
DeWalt DT6824QZ SDS Max Steel Flat 50mm - 360mm Length
DeWalt DT6824QZ SDS Max Steel Flat 50mm - 360mm Length

The DeWalt SDS Max steel chisels are made from toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment ... More Info

£46.10 INC VAT
DeWalt DT6825QZ SDS Max Steel Flat 80mm - 300mm Length
DeWalt DT6825QZ SDS Max Steel Flat 80mm - 300mm Length

The DeWalt SDS Max steel chisels are made from toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment ... More Info

£68.22 INC VAT
DeWalt DT6830QZ SDS Max SDS Plus Adaptor
DeWalt DT6830QZ SDS Max SDS Plus Adaptor

The DeWalt DEWDT6830QZ SDS max to SDS plus drive adaptor fits all SDS max machines and the adaptor enables machines to use SDS plus drill bits.... More Info

£159.21 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13]
Terms & Conditions
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.

© 2026 Corroy Products
Wednesday 16th September 2026