To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm incremen...More Info
To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm incremen...More Info
Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal t...More Info
Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.
Dimensions:
OL=84.5 mm
Spigot length incl thread=45 mm
Spigot thr...More Info
Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal t...More Info
Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of position...More Info
Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positio...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=40 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=40 mm
C=...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=41.3 mm
Kerf=6.0 mm
No. of Te...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=41.3 mm
Kerf=8.0 mm
No. of Te...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=41.3 mm
Kerf=10 mm
No. of Tee...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Dimensions:
D=40 mm
Kerf=7.0 mm
No. of Teet...More Info
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Dimensions:
D=50 mm
Bo...More Info
A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads. Ref. 35/01 - No.10 & No.12 screw heads.
Not suitable ...More Info
A range of heavy duty 'T' slot cutters for clamping and hanging applications.
MEC mechanical feed only.
Dimensions:
D=28 mm
D2=11.2 mm
C=4 mm
...More Info
Slots for concealing electric cables etc.
A 6mm slot must be cut first to allow for the cutter neck.
Care must be taken to avoid breakage.
Di...More Info
Ideal for hiding pipes and cables.
Part of curve can be used for producing decorative edges.
An initial slot is required before using the ball gro...More Info
A range of heavy duty 'T' slot cutters for clamping and hanging applications.
Relief cut required.
Dimensions:
D=28 mm
D2=9.5 mm
C=8 mm
Shank ...More Info
A range of heavy duty 'T' slot cutters for clamping and hanging applications.
Relief cut required.
Dimensions:
D=35 mm
D2=12.7 mm
C=9.5 mm
Sha...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing...More Info
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.
Dimensions:
D=41 mm
C=6.35 mm
B=2...More Info
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.
Dimensions:
D=41 mm
C=6.35 mm
B=22 ...More Info
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.
Dimensions:
D=41 mm
C=6.35 mm
B=22 ...More Info
A reversible finger jointer, to increase the gluing area for edge to edge joints.
Dimensions:
D=40.0 mm
D2=31 mm
C=32 mm
Shank Diameter=1/2 inc...More Info
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build u...More Info
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build u...More Info
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build u...More Info
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build u...More Info
This versatile 1/2 inch shank groover set offers grooving widths of 3.2mm, 4.0mm, 4.8mm and 6.3mm. It is infiniteley variable from 6.6mm to 18mm in 0...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Requires an arbor Ref. 33/60 and suitable diamet...More Info