Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approx. 1.0mm flat will be found on nose.
Dimensions:
D=1/2 ...More Info
Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approx. 1.0mm flat will be found on nose.
Dimensions:
D=1/2 ...More Info
Template thickness should be 5mm thicker than cut length of cutter.
Dimensions:
D=1/2 inch
D=12.7 mm
C=9.5 mm
B=12.7 mm
R=1/4 inch
R=6.35 mm
...More Info
A quarter ellipse cutter for architraves and hand rails.
Ref 46/42 can be used to form the top portion of handrail moulding when used in conjunction...More Info
Some Ovolo cutters can be used with radius cutters, to make rule joints.
Ref. 7/01 has an extra long shank of 40mm.
Dimensions:
D=3/8 inch
D=9...More Info
The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be ...More Info
The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be ...More Info
For panel and veining work. Ideal for barley twists using the Routerlathe.
Dimensions:
D=1 1/16 inch
D=27 mm
C=5/8 inch
C=16 mm
R=7.5 mm
Over...More Info
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timb...More Info
A quarter ellipse cutter for architraves and mould finishes.
For stationary machines - 12000 RPM recommended speed.
Dimensions:
D=69.2 mm
C=16.0...More Info
Wide combination moulds for edging table tops and shelves.
For stationary machines - 16000 RPM recommended speed.
Dimensions:
D=63 mm
C=20 mm
B...More Info