Product Code: TRELOCK/JIG/A
For routing the face-plate and mortise for larger locks quickly & accurately.
Suitable for DDA (Disabilty Discrimination Act) lock size.
20mm x 235mm radius end face plate and 17mm x 170mm mortise.
Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG).
Suitable for doors 34mm to 58mm thick.
An auger bit and drill is required to complete deep mortises.
The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Click here for additional lock jig templates.
Dimensions:
Door thickness min.=34 mm
Door thickness max.=58 mm
Includes templates for locks having the following
Face-plate Dimensions
Metric=Template
20x235 mm radius end=1
24x235 mm radius end=2
Mortise Dimensions
Metric=Template
17x170 mm=A*
*Mortise is actually 180mm to give 5mm clearance each end. |
;)
