Product Code: TREC187X8MMTC
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pass.
Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
Stationary use only.
Can be used for curved panels if a copy pin is used.
Dimensions:
D=45 mm
D2=11 mm
C=17 mm
A=10 degrees
Overall length=49.5 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Metric: 45
Diameter 2 Metric: 11
Cut Length Metric: 17
Angle: 10 |
;)
