Product Code: TREC150X1/2TC
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pass.
Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
Stationary use only.
Can be used for curved panels if a copy pin is used.
Dimensions:
D=41 mm
D2=7 mm
C=12 mm
R=12 mm
Overall length=50 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 41
Diameter 2 Metric: 7
Cut Length Metric: 12 |
;)
