Product Code: TREC078X1/2TC
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
Dimensions:
D=31.7 mm
C=5/8 inch
C=15.9 mm
B=9.5 mm
B2=12.7 mm
R=9.5 mm
R=3/8 inch
Overall length=66 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 31.7
Cut Length Imperial: 5/8
Cut Length Metric: 15.9
Bearing Diameter Metric: 9.5 |
;)
