Product Code: TRE46/23X1/2TC Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.
A maximum of 3mm overlap should be left before copy profiling.
When using plastic laminate adhesive to dry before trimming.
This avoids clogging the guide bearing.
Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.
Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
Dimensions:
D=12.7 mm
C=50 mm
B=12.7 mm
A=90 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 12.7
Cut Length Metric: 50
Bearing Diameter Metric: 12.7 |