Product Code: TRE46/10X3/8TC Profiler with shank mounted bearing guides.
For use with router mounted above or below a table when following a template.
For profiling and rebating applications only.
Not for plunge cutting/grooving.
A 3mm maximum overlap should be left before trimming.
They are ideal for template making.
Refs. 46/910, 46/911 and 46/91 have a shorter cutter length for use on thin boards.
Refs. 46/900 and 46/902 have double bearings for stability.
Dimensions:
D=26 mm
C=1 inch
C=25.4 mm
B=26.0 mm
A=90 degrees
Shank Diameter=3/8 inch
Shank Diameter: 3/8
Diameter Metric: 26
Cut Length Imperial: 1
Cut Length Metric: 25.4
Bearing Diameter Metric: 26.0
Angle: 90 |