Product Code: TRE2/6X1/4TC
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
Small diameter tools must be handled with care to avoid breakage.
Single flute cutters should not be used in eccentric chucks.
Dimensions:
D1=1/4 inches
D1=6.3 mm
C=19 mm
Overall length=50 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/4
Diameter Metric: 6.3
Cut Length Metric: 19
Overall Length Metric: 50 |
;)
