Product Code: C074AX1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
Dimensions:
D=15.9 mm
C=5/16 inch
C=7.9 mm
B=9.5 mm
B2=12.7 mm
R=1/16 inch
R=1.6 mm
Overall length=59.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 15.9
Cut Length Imperial: 5/16
Cut Length Metric: 7.9
Overall Length Metric: 48
Bearing Diameter Metric: 9.5 |
;)
