TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plung...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plung...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plung...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plung...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plung...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plung...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensio...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensio...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensio...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensio...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensio...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensio...More Info
A guided radius with bevel cutter to accent the base of award plaques, name plaques, display stands etc.
Dimensions:
D=27 mm
C=12.7 mm
OL=64 mm
...More Info
Three flutes for extra fine finish.
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Dimensions:
D1=34 mm
C=11 mm
B=12....More Info
These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate ...More Info
These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate ...More Info
Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.
Blades for 46/010 can be rotated by exchangi...More Info
Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.
Blades for 46/010 can be rotated by exchangi...More Info
Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.
Blades for 46/010 can be rotated by exchangi...More Info
Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.
Blades for 46/010 can be rotated by exchangi...More Info
Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.
Blades for 46/010 can be rotated by exchangi...More Info
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop produ...More Info
Two flute mini-trim with guide bearing will profile intricate shapes.
Max. 2.0mm trimming.
Dimensions:
D=1/4 inch
D=6.3 mm
C=1/2 inch
C=12.7...More Info
A self-guided combination trimmer.
A 90 degree trim is obtained by engaging the bottom half.
A 45 degree trim is obtained by lowering the cutter....More Info
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop produ...More Info
Two flute mini-trim with guide bearing will profile intricate shapes.
Max. 2.0mm trimming.
Dimensions:
D=1/4 inch
D=6.3 mm
C=25.4 mm
B=Fract...More Info