Product Code: TRE2/10X1/4TC
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
Small diameter tools must be handled with care to avoid breakage.
Single flute cutters should not be used in eccentric chucks.
Dimensions:
D1=5/64 inches
D1=2 mm
C=5 mm
Overall length=43 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 5/64
Diameter Metric: 2
Cut Length Metric: 5
Overall Length Metric: 43 |
;)
