The G & J Hall Bradrad® precision tools drill and deburr in material thicknesses up to 10mm. Designed for industrial applications, each step produces accurate, parallel holes with a small clearance on the nominal diameter. It positively deburrs the entry side as the hole is drilled, and if the work can be reversed, both sides.

'S’ Type Bradrad® drills are used to machine a wide variety of materials and for many different applications. No pilot drill is required, and good quality deburred holes are produced with minimum fuss using a bench drill or light pedestal drilling machine.
Each Bradrad® has eleven different drilling diameters.

When drilling metals always use a coolant.

Size. 8 - 38 mm.

8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38mm

Supplied with a 10 mm (3/8in) Shank Diameter.